材料科学
微波辐射
复合数
退火(玻璃)
辐照
复合材料
3D打印
微波食品加热
热的
工程类
物理
核物理学
电信
气象学
作者
Huifang Zhang,Jieying Zhi,Xiaoxuan Lu,Xiaoqing Gao,Youyi Sun,Yu Yang
出处
期刊:Journal of Polymer Engineering
[De Gruyter]
日期:2025-01-23
卷期号:45 (3): 226-235
被引量:1
标识
DOI:10.1515/polyeng-2024-0196
摘要
Abstract 3D printing polymers and their composites have shown considerable potential in various application fields, yet their limited mechanical properties have hindered widespread use in structural materials. Recently, postprocessing techniques have been proposed as efficient and convenient methods to enhance the mechanical properties of 3D printing structures. This study systematically investigates the effects of thermal annealing and microwave irradiation on the microstructure and mechanical properties of 3D printing carbon fiber reinforced polyamide 12 (CF/PA12). The results clearly demonstrate that thermal annealing significantly outperforms microwave irradiation in improving fiber–matrix interfacial adhesion and crystallization. Specifically, thermal annealing provides necessary time for molecular chain relaxation, effectively releasing internal stresses. Additionally, thermal annealing optimizes the transcrystalline structure at the fiber–matrix interface and the volume fraction of crystalline regions within the matrix. Compared to the pristine samples, the annealed 3D printing specimens exhibited increases of 19.34 % in tensile strength and 27.11 % in flexural strength. This research provides an in-depth insight into enhancing 3D printing CF/PA12 composites through postprocessing techniques and offers a scientific basis for their large-scale application.
科研通智能强力驱动
Strongly Powered by AbleSci AI