Comparative study of the explosive blast resistance of metal and composite materials used in defence platforms

Naval ships, military aircraft and land defence platforms are mostly constructed using steel, aluminium alloy, carbon fibre composite and/or glass fibre composite materials. Defence platforms are at risk from shock wave loads generated by explosive events, and therefore it is imperative that the construction materials are resistant to blast-induced deformation and damage. A comparative assessment is presented into the dynamic deformation and damage of metals and composites representative of naval construction materials when subjected to explosive air blasts. Flat plates of equal thickness (4 mm) or plates of similar areal density (in the range 6.2–9.2 kg/m2) made of the four materials were subjected to explosive blasts. Experimental blast testing and finite element (FE) modelling revealed that when the plate thickness was the same (4 mm) then the steel experienced less deformation (by ∼50–60%) and plasticity than the aluminium alloy due to its higher mechanical properties. The steel and aluminium plates were more resistance to blast-induced deformation (by up to ∼260–320% and ∼130–145% respectively) than the composite materials of the same thickness (4 mm). However, when the materials are compared on similar areal density, which is critical for lightweight design, the blast performance of the composite materials was similar to aluminium alloy and superior to steel. Deformation of the steel was up to 50% higher than the other construction materials, with the percentage increase rising with blast impulse.