离子电导率
材料科学
电导率
结晶度
电解质
分析化学(期刊)
介电谱
离子液体
傅里叶变换红外光谱
电化学
聚合物
电介质
电化学窗口
化学工程
化学
电极
物理化学
有机化学
复合材料
工程类
光电子学
催化作用
作者
Devesh Chandra Bharati,A.L. Saroj
标识
DOI:10.1080/25740881.2023.2175223
摘要
Plasticized bio-polymer blend electrolytes (BPBEs) based on CS-PVA-NaI-xwt% ionic liquid (IL), 1-ethyl-3-methylimidazolium methyl sulfate [EMIM][MS] were prepared using solution cast method. The prepared samples have been characterized using FTIR (in ATR mode), XRD, TGA, Impedance spectroscopy, ITN, LSV, and CV measurement. XRD result shows the semi-crystalline nature of BPEs films with characteristic peaks centered at 2θ = 21°. The % degree of crystallinity (Xc) for BPBE films were found to decrease up to 15 wt%IL. FTIR analysis shows the interaction of NaI/IL with the constituents of polymer CS/PVA. Thermo-gravimetric analysis (TGA) shows that the BPBE film has multistep decomposition. AC conductivity spectra follow the Joncher’s power law (JPL) with the value of power law exponent >1. The transportation of charge carriers in the BPBE films follows the cage type correlate barrier hoping (CBH) mechanism. The sample, BPBE#15IL, was found to be optimum dc conductivity ~ 1.7x10−4S/cm at 30℃. The electrode polarization and conductivity relaxation in terms of dielectric permittivity and electric modulus have been realized. Ionic transference number (ITN) measurement reveals that the sample BPBE#15IL has the ionic conductivity due to ions only (ITN~ 0.99). LSV measurement shows that the value of electrochemical stability window (ESW) for sample BPBE#15IL ~±2.3 V. CV plot shows the appearance of symmetric oxidation-reduction peaks appeared at ~±1.5 V.
科研通智能强力驱动
Strongly Powered by AbleSci AI