Thermodynamic analysis of a metal hydride hydrogen compressor with aluminium substituted LaNi5 hydrides

The operating conditions of a Metal Hydride Hydrogen Compressor (MHHC) is often dictated by the hydride used to build it. This research focuses on finding the appropriate operating conditions for MHHC to get the ideal throughput and efficiency using aluminium based hydrides. For this, hydrogen absorption and desorption characteristics of LaNi 5-x Al x (where x is 0, 0.2 and 0.4) hydrides were studied for estimating the suitability of these materials for developing hydrogen compressor. From the Pressure Concentration Isotherms (PCIs) and van't Hoff plot, an estimate of the reversible hydrogen weight percent attainable, equilibrium pressure and absorption and desorption temperature range were collected and the effect of aluminium concentration on these properties was studied. Further thermodynamic analysis was made by calculating the performance parameters like thermal efficiency, isentropic work required, theoretical heat supplied and pressure ratio by varying the operating conditions like supply pressure (3–5 bar), absorption temperatures (20–40 °C), and desorption temperature (80–140 °C). It is observed that the higher aluminium content in the hydride allows the hydrogen compressor to be operated at a lower supply pressure. Whereas lower aluminium content in hydrides give higher thermal efficiency and discharge pressure for a particular desorption temperature, while requiring a higher supply pressure to perform efficiently. The maximum thermal efficiency within the studied operating conditions was found to be 0.24 for LaNi 5 at 3 bar supply pressure, 30 °C absorption and 140 °C desorption temperature with a pressure ratio of 8.97. • Thermodynamic analysis is a prerequisite to understand the performance of metal hydride-based hydrogen compressor. • Hydrogen absorption and desorption PCIs of LaNi 5-x Al x hydrides are measured by a Sievert's type instrument. • Performance parameters are analysed at different operating conditions. • Hydrides with higher Aluminum content showed reduction in delivery pressures and efficiency.