Ultrasonic fatigue testing in the scanning electron microscope

Abstract The continuing trend to increase the performance and durability of machines requires the use of materials, whose structural integrity must be ensured far beyond the classical fatigue limit. In this so-called „very high cycle fatigue“ regime (VHCF), the materials show a strong scatter in fatigue life, which makes life service assessment difficult. Present studies on austenitic-ferritic duplex steel 1.4462 (X2CrNiMoN22-5-3) have shown that the reason of this scatter in fatigue life can be found in the microstructural length scale mainly due to the barrier effect of grain and phase boundaries. The integration of an ultrasonic fatigue testing system in a high-resolution scanning electron microscope allows observing and evaluating the active microstructural mechanisms of fatigue crack initiation and early crack propagation, such as the formation and propagation of slip bands, during the majority of VHCF life. Additional micro texture measurements by electron backscatter diffraction (EBSD) provide data for the development of a mechanism-oriented numerical short crack simulation. In the context of crack initiation and propagation in the VHCF regime in duplex stainless steel, the focus of the present paper is put on the technical realization of the in-situ ultrasonic fatigue testing in the scanning electron microscope.