黄铜矿
双酚A
铁质
化学
机制(生物学)
催化作用
化学工程
降级(电信)
铜
有机化学
环氧树脂
电信
计算机科学
工程类
哲学
认识论
作者
Wenshan Nie,Qihang Mao,Yaobin Ding,Yue Hu,Heqing Tang
标识
DOI:10.1016/j.jhazmat.2018.09.078
摘要
Abstract Chalcopyrite nanoparticles (CuFeS2 NPs) with abundant surface bonded ferrous were successfully prepared, characterized and used as a catalyst for peroxymonosulfate (PMS) activation and BPA degradation. The effect of reaction parameters such as initial pH, catalyst load, PMS concentration, initial BPA concentration and reaction temperature on BPA degradation in CuFeS2-PMS system was systematically investigated. As a bimetallic sulfide, CuFeS2 exhibits ultra-high activity for PMS activation compared with Cu2S, FeS2, CuFeO2 and Co3O4. It was found that by co-use of 0.1 g L−1 CuFeS2 and 0.3 mmol L−1 PMS, 20 mg L−1 of BPA was almost completely degraded (99.7%) and reached a mineralization rate of 75% within 20 min. The highly catalytic activity of CuFeS2 is closely related to two aspects: one is that S2− in the catalysts promotes the cycling of Fe3+/Fe2+ and Cu2+/Cu+ cycles on the surface, and the other is the synergistic effect of Fe3+/Fe2+ and Cu2+/Cu+ cycles in the PMS activation. These interesting findings shed some new insight on the development of metal sulfides for the oxidative treatment of organic contaminants.
科研通智能强力驱动
Strongly Powered by AbleSci AI