膜
膜污染
结垢
润湿
化学工程
生物污染
材料科学
接触角
过滤(数学)
色谱法
化学
复合材料
生物化学
工程类
数学
统计
作者
Yi Li,Ruonan Gao,Jianwen Zhang,Yue Zhang,Shuai Liang
出处
期刊:Membranes
[Multidisciplinary Digital Publishing Institute]
日期:2022-06-16
卷期号:12 (6): 626-626
被引量:17
标识
DOI:10.3390/membranes12060626
摘要
Membrane fouling severely hinders the sustainable development of membrane separation technology. Membrane wetting property is one of the most important factors dominating the development of membrane fouling. Theoretically, a hydrophilic membrane is expected to be more resistant to fouling during filtration, while a hydrophobic membrane with low surface energy is more advantageous during membrane cleaning. However, conventional membrane materials do not possess the capability to change their wettability on demand. In this study, a stainless steel mesh–sulfosuccinate-doped polypyrrole composite membrane (SSM/PPY(AOT)) was prepared. By applying a negative or positive potential, the surface wettability of the membrane can be switched between hydrophilic and relatively hydrophobic states. Systematic characterizations and a series of filtration experiments were carried out. In the reduction state, the sulfonic acid groups of AOT were more exposed to the membrane surface, rendering the surface more hydrophilic. The fouling filtration experiments verified that the membrane is more resistant to fouling in the hydrophilic state during filtration and easier to clean in the hydrophobic state during membrane cleaning. Furthermore, Ca2+ and Mg2+ could complex with foulants, aggravating membrane fouling. Overall, this study demonstrates the importance of wettability switching in membrane filtration and suggests promising applications of the SSM/PPY(AOT) membrane.
科研通智能强力驱动
Strongly Powered by AbleSci AI