Modeling VARTM Processes with Hybrid Media Incorporating Gravity Effects

Vacuum-assisted resin transfer molding (VARTM) processes are increasingly used in manufacturing scale-up composite applications. Accordingly, gravity can significantly influence the flow behavior in tall-structure composite manufacturing processes. The present study developed a closed-form analytic solution incorporating gravity effects with the equivalent parameter approach in order to predict the resin flow behavior in a tall structure resin infusion. A hybrid model was used that consists of thin distribution media and a fibrous preform. An analytic solution was developed and validated with experiments as well as numerical methods in terms of the resin flow front shape, lag length, and the flow front location with time for the horizontal, upward, and downward infusion cases. The flow front locations were monitored using time domain reflectometry sensors embedded in the fabric layers. The lag length was constant in the horizontal infusion case, but decreased and increased in the upward and downward infusion cases, respectively, as resin progressed. The downward infusion case showed the fastest fill time, which corresponds to the previous results using a homogenous model. However, the flow became unstable at a certain location where the local flow front speeds increased suddenly along the distribution media. These phenomena were not observed in a model with homogenous media but were observed in a model with hybrid media, only in the downward infusion cases. The analytic solution also identified the stable flow conditions with the mold angles. The results obtained in the present study can be used to estimate stable process conditions in designing VARTM processes for manufacturing large-scale tall composite structures.