乙二胺四乙酸
电镀(地质)
线性扫描伏安法
乙二醇
电镀
柠檬酸
沉积(地质)
化学
循环伏安法
铋
锡
无机化学
核化学
材料科学
螯合作用
化学工程
电化学
有机化学
电极
物理化学
图层(电子)
沉积物
古生物学
工程类
地质学
生物
地球物理学
作者
Yi-Da Tsai,Chi‐Chang Hu
摘要
Interactive effects of complex agents, including citric acid (CA), ethylenediaminetetraacetic acid (EDTA), and poly(ethylene glycol) (PEG) on the electroplating behavior of Sn–Bi deposits from a basic bath containing 0.15 M Sn 2 + and 0.05 M Bi 3 + with pH 2, were systematically compared by linear sweep voltammetry (LSV) analyses. The onset potential of Bi deposition is obviously shifted to a negative value close to that of Sn deposition by the simultaneous addition of the above three compounds into the basic plating solution. Based on the LSV results, the composition of Sn–Bi deposits with Sn varying from 44 to 96 wt % can be controlled by varying the current density of electroplating and the concentration of EDTA from the basic plating bath containing 0.3 M CA and 0.2 M PEG. This plating bath provides a reliable route to obtain Sn–Bi alloys of high Sn content (e.g., 80Sn–20Bi and 90Sn–10Bi) and the eutectic 42Sn–58Bi deposit. Tin–bismuth deposits plated from the basic bath with different combinations of the above three complex agents were also characterized by scanning electron microscopic and energy-dispersive spectroscopic analyses.
科研通智能强力驱动
Strongly Powered by AbleSci AI