电容感应
微电子机械系统
材料科学
电容
制作
倾斜感应器
微流控
流体学
光电子学
导电体
微通道
电介质
介电常数
倾斜(摄像机)
光刻胶
电子工程
印刷电路板
带宽(计算)
电极
电气工程
机械工程
光学
计算机科学
纳米技术
工程类
图层(电子)
医学
替代医学
计算机网络
光纤
化学
复合材料
物理化学
病理
物理
作者
Blas Salvador,Antonio L. Luque,Jose Manuel Quero
出处
期刊:
[Institute of Electrical and Electronics Engineers]
日期:2015-03-01
卷期号:: 3356-3360
被引量:13
标识
DOI:10.1109/icit.2015.7125596
摘要
This paper presents a low-cost tilt sensor based on fluidic movement and fabricated using PCB-MEMS techniques. The principle of operation is the measurement of capacitance change between two electronics inside a circular channel, partially filled with a non-conductive liquid. Physical principle and mathematical analysis are presented, followed by the design and fabrication process. This process is based on a combination of standard PCB processing, useful and inexpensive to create copper electrodes, with SU-8 positive photoresist to build the channels. The choice of the liquid to be used has a strong influence on the final behavior, and properties like dielectric permittivity and surface tension must be taken into account simultaneously. Experimental results show that tilt is measured using the prototype device in a range close to 360°, with a sensitivity up to 0.0036pF/° and a bandwidth of 0.18Hz.
科研通智能强力驱动
Strongly Powered by AbleSci AI