材料科学
压阻效应
导电体
复合材料
复合数
石墨烯
炭黑
电导率
灵敏度(控制系统)
纳米颗粒
脆性
碳纤维
压力传感器
聚酰亚胺
热液循环
碳纳米纤维
纳米技术
航程(航空)
光电子学
二进制数
纳米复合材料
碳纳米管
大气温度范围
电阻率和电导率
纳米
响应时间
作者
保国 徐,Suhui Yuan,Xin Fu,L H Zhang,Shihui Han,Gaohui Sun
摘要
Foam‐based flexible pressure sensors have garnered considerable interest due to their low cost, light weight, high sensitivity, and flexibility. However, conventional foams tend to soften or become brittle under extreme temperatures, and their single‐system conductive networks limit pressure‐sensitive performance enhancement. Herein, reduced graphene oxide‐carbon black (rGO‐CB)‐coated polyimide (PI) composite sponges were prepared via hydrothermal self‐assembly and freeze‐drying using thermally stable PI sponges. The zero‐dimensional CB nanoparticles function as conductive bridges embedded in two‐dimensional rGO interlayers, constructing a point‐to‐plane coupled binary carbon structure that forms a three‐dimensional conductive network with a significant synergistic effect. The maximum conductivity reaches 2.55 × 10 −3 S m −1 , which is 4.17 and 1.8 × 10 5 times those of the pure rGO/PI and CB/PI composite sponges, respectively. The sensor exhibits a sensitivity of 0.875 kPa −1 within the 0–1 kPa range, which is 2.13 times that of the single rGO/PI sponge, and shows good cycle stability after 1000 compressions. Furthermore, the sensor effectively retains its functionality at room temperature after 6 h treatments at 450 and −196 °C, with its sensitivity in the 0–2 kPa range reaching 135.6% and preserving 88.7% of the initial value, respectively. This provides a reference for flexible sensors in extreme environments.
科研通智能强力驱动
Strongly Powered by AbleSci AI