材料科学
微观结构
延伸率
极限抗拉强度
材料的强化机理
软化
再结晶(地质)
复合材料
晶界
冶金
晶界滑移
加工硬化
动态再结晶
堆积
产量(工程)
热的
纳米尺度
增韧
镁合金
可塑性
应变硬化指数
锻造
铁氧体(磁铁)
合金
拉伸试验
粒度
工作(物理)
作者
Dong Ma,Chunjie Xu,Yu Wen,Runhua Li,Fanhong Zeng,Dan Shechtman,Sergei Remennik,Pengyang Li,Daniel Safranchik,Shang Sui
标识
DOI:10.1016/j.jma.2026.102207
摘要
Improving the mechanical properties of magnesium (Mg) alloys at elevated temperature remains a critical challenge for their application in aerospace components. This study utilized wire arc additive manufacturing (WAAM) technology to fabricate Mg-Gd-Y-Zn-Zr alloys, systematically evaluating the tensile properties and strengthening mechanisms of both as-built and heat-treated specimens at room temperature, 200 °C, 250 °C, and 300 °C. The results indicated that the characteristic rapid non-equilibrium solidification path of WAAM significantly refined the microstructure, enabling the as-built specimens to maintain a yield strength of 157.9 ± 4.1 MPa and an elongation of 20.3 ± 3.4% at 250 °C. Subsequent heat treatment facilitated the formation of long-period stacking ordered (LPSO) structures and nanoscale β′ precipitates, collectively establishing a multi-scale synergistic strengthening architecture. This multi-scale microstructure exhibited remarkable thermal stability, which resulted in a yield strength of 257.6 ± 5.2 MPa and an elongation of 18.6 ± 4.4% at 250 °C. Microstructural analysis revealed that the LPSO structures accommodated plastic strain via kinking deformation, while the β′ precipitates effectively pinned dislocations. This synergy effectively suppressed grain boundary sliding and the softening induced by dynamic recrystallization at elevated temperature. This work elucidated the elevated-temperature strengthening and toughening mechanisms achieved via the WAAM process and multi-scale microstructural design, providing a novel paradigm and theoretical foundation for the development of high-performance Mg alloys.
科研通智能强力驱动
Strongly Powered by AbleSci AI