现场可编程门阵列
计算机科学
量化(信号处理)
歪斜
同步(交流)
电子工程
非线性系统
灵敏度(控制系统)
时钟偏移
采样(信号处理)
信号(编程语言)
查阅表格
时钟频率
布线(电子设计自动化)
建筑
嵌入式系统
时钟信号
逻辑门
实时计算
时钟同步
计算机硬件
控制理论(社会学)
计量系统
算法
调度(生产过程)
作者
Xin Yu,Lanlin Ni,Mengyao Fan,Haojie Xia
标识
DOI:10.1088/1361-6501/ae9e5f
摘要
Precise time-interval measurement in multichannel systems is limited by routing-induced skew and the difficulty of cross-clock synchronization. This paper presents a robust multi-phase clock time-to-digital converter (TDC) architecture for time-of-flight (TOF) applications that addresses both limitations. To reduce sensitivity to process, voltage, and temperature (PVT) variations, the architecture combines two techniques. Manual skew-compensated routing equalizes the physical distribution of the hit signal and reduces differential nonlinearity (DNL), while dedicated transition-look-for synchronization logic prevents setup-time violations at the clock-domain boundary. The design was implemented on a low-cost 28 nm Xilinx Kintex-7 FPGA operating at 700 MHz. A 16-phase sampling scheme provides an equivalent quantization bin width of 89.3 ps, and measurements show a stable single-shot RMS precision of 38–45 ps. The low resource use of the architecture supports scalable, cost-effective precision timing in high-density TOF systems and analytical instruments.
科研通智能强力驱动
Strongly Powered by AbleSci AI