Cu/Nb2O5, Fe/Nb2O5 and Cu-Fe/Nb2O5 applied in salicylic acid degradation: Parameters studies and photocatalytic activity

This study describes the synthesis of Cu/Nb₂O₅, Fe/Nb₂O₅, and Cu-Fe/Nb₂O₅ catalysts obtained by incorporating copper and/or iron metals into niobium pentoxide (Nb₂O₅). The new materials were characterized by the following techniques: Thermogravimetric Analysis (TA), surface and pore analysis, X-ray diffractometry (XRD), and Fourier Transform Infrared Spectroscopy (FT-IR). The catalyst was applied in the photocatalytic degradation of salicylic acid (SA). The influence of different parameters (calcined temperature, pH, and metal addition) on the photocatalytic reaction was evaluated. The results indicated that catalysts containing copper were more active and pH influenced the SA degradation process. SA removal results indicated that Cu/Nb₂O₅ photocatalyst presented a 1.5 fold higher degradation after 120 min in comparison to Cu-Fe/Nb₂O₅ and 4.6 fold higher than Fe/Nb₂O₅ catalyst, all them calcined at 400 °C. In tests carried out in the presence of formic acid, increasing the pH from about 3 to 7 allowed an almost 3.4-fold increase in SA degradation for the Cu-Fe/Nb₂O₅ catalyst calcined at 400 °C.