Extracting the DBH of Moso Bamboo Forests Using LiDAR: Parameter Optimization and Accuracy Evaluation

The accurate determination of the Diameter at Breast Height (DBH) of Moso bamboo is crucial for estimating biomass and carbon storage in Moso bamboo forests. In this research, we utilized handheld LiDAR point cloud data to extract the DBH of Moso bamboo and enhanced the accuracy of diameter fitting by optimizing denoising parameters. Specifically, we fine-tuned two denoising parameters, neighborhood point number and standard deviation multiplier, across five gradient levels for denoising. Subsequently, DBH fitting was conducted on data processed with varying denoising parameters, followed by a precision evaluation to investigate the key factors influencing the accuracy of Moso bamboo DBH fitting. The research results indicate that a handheld laser was used to scan six plots, from which 132 single Moso bamboo trees were selected. Out of these, 122 single trees were successfully segmented and identified, achieving an accuracy rate of 92.4% in identifying single Moso bamboo trees, with an average accuracy of 95.64% in extracting DBH for individual plants; the mean error was ±1.8 cm. Notably, setting the minimum neighborhood point to 10 resulted in the highest fitting accuracy for DBH. Moreover, the optimal standard deviation multiplier threshold was found to be 1 in high-density forest plots and 2 in low-density forest plots. Forest condition and slope were identified as the primary factors impacting the accuracy of Moso bamboo DBH fitting.