材料科学
电解质
锂(药物)
离子电导率
结晶度
电导率
合金
环氧乙烷
聚合物
陶瓷
惰性
快离子导体
复合数
化学工程
复合材料
化学
电极
有机化学
医学
物理化学
工程类
内分泌学
共聚物
作者
Dongyan Ren,Xin De Tang,Qi‐Qiang Wang,Haifeng Du,Ling Ding
出处
期刊:ACS omega
[American Chemical Society]
日期:2024-08-06
卷期号:9 (33): 35920-35928
被引量:8
标识
DOI:10.1021/acsomega.4c05040
摘要
High Resolution Image Download MS PowerPoint Slide Poly(ethylene oxide) (PEO) electrolytes usually suffer from low room temperature (RT) ionic conductivity and a narrow voltage window, which limits the improvement of energy density and practical applications in all-solid-state batteries. Composite polymer electrolytes (CPEs) are regarded as the common method to reduce the crystallinity of polymers and increase the lithium ion conductivity. Compared with active or inert ceramic material fillers in previous studies, aluminum–lithium alloy fillers are used to prepare composite electrolytes in this study, showing excellent performance at room temperature. The conductivity of the PEO-based electrolytes increases by a factor of 3.62–3.62× 10 –4 S cm –1 at RT with 5 wt % Al–Li alloy. The transference number of Li + is increased to 0.524. The characteristics of the Al–Li alloy and higher conductivity enable the composite electrolyte to stabilize the interface with the electrodes, reducing the polarization of solid-state batteries. The all-solid-state Li/PEO-5%/LiFePO 4 cells show the highest initial discharge capacity of 153 mAh g –1 and the highest stable discharge capacity of 147 mAh g –1 with the initial Coulombic efficiency of more than 100%. It also exhibits the best rate capacity and cycle performance (90% capacity retention rate after 100 cycles).
科研通智能强力驱动
Strongly Powered by AbleSci AI