材料科学
磺酸
化学工程
硅
环氧树脂
乙醚
降级(电信)
能量转换效率
碳纤维
氧气
光化学
复合数
双键
硫黄
高分子化学
光电子学
光伏系统
Atom(片上系统)
甲基丙烯酸缩水甘油酯
太阳能电池
亲核细胞
聚二甲基硅氧烷
缩合反应
有机化学
聚合物太阳能电池
作者
Yuzhou Liu,Qi Geng,Zhe Wang,Zhen Liu,Zhongliang Gao,Xin Sun,Yingfeng Li,Meicheng Li
标识
DOI:10.1021/acsami.5c14719
摘要
Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS), possessing excellent film-forming properties and high electric conductivity, is widely used in optoelectronic devices. However, the hygroscopicity of PSS results in progressive degradation of device performance during storage. Here, 4- tert -butylphenyl glycidyl ether was introduced as a reactive modifier into the PEDOT:PSS system to weaken the hygroscopicity of the PEDOT:PSS film. The 13 C NMR spectra confirmed the ring-opening reactions initiated by nucleophilic attack from the sulfonic acid groups in PSS. This reaction formed the new C–O bond between the carbon atom of the epoxy group and the oxygen atom of the sulfonic acid groups in PSS, successfully locking the hygroscopic sulfonic acid groups, thereby effectively weakening the hygroscopicity of the PEDOT:PSS film. Furthermore, the silicon hybrid solar cells were fabricated with modified PEDOT:PSS. It was found that, after 500 h of ambient air storage, the device retained 77% of the initial power conversion efficiency (PCE) of 12.31% compared to only 27% retention with the original PEDOT:PSS. This strategy provides a reference for developing stable and cost-effective optoelectronic devices utilizing PEDOT:PSS.
科研通智能强力驱动
Strongly Powered by AbleSci AI