聚脲
材料科学
聚氨酯
复合材料
复合数
涂层
接触角
热重分析
傅里叶变换红外光谱
预聚物
表征(材料科学)
碳酸丙烯酯
化学工程
纳米技术
物理化学
化学
工程类
电化学
电极
作者
Emir Temizkan,Gülden Eroğlu,Ayça Ergün,Hüseyin Deligöz
摘要
Preparation and characterization of a series of polyurea (PU) coatings and their influences on layered composite materials based on rebonded polyurethane (PUr) for floor application are described in terms of the raw materials, formulation, and application performance. While PU coatings show almost the same FTIR peaks, thermogravimetric analyses results reveal that thermal stabilities of the PU coatings are slightly enhanced with the use of trifunctional polyamine compound and one step degradation takes place beyond 300°C. All PU coatings have very dense, smooth, and bubble‐free surfaces whereas the cross‐sectional SEM images exhibit pores of different sizes. Contact angle values of all PU coatings are bigger than 90° indicating that the surfaces are hydrophobic. Using propylene carbonate in the preparation of methylene diphenyl diisocyanate (MDI) prepolymer and the chain extender in the PU coating formulation impacts the mechanical and electrical properties of the PU coatings as well as layered PU/PUr composite materials. In conclusion, not only the controllable physicochemical and mechanical properties of layered PUr/PU composites but also the usage potential of recycled PU scraps in these layered composites are very promising for better floor applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI