铀
化学
吸附
活性炭
废物管理
电极
废水
碳纤维
环境科学
核化学
材料科学
冶金
有机化学
复合数
工程类
物理化学
复合材料
作者
Meng Pan,Chang Cui,Weiwu Tang,Zhiren Guo,Dongxiang Zhang,Xiyan Xu,Jinying Li
标识
DOI:10.1016/j.seppur.2021.119843
摘要
An amidoxime modified carbon cloth electrode (CC-AO) was applied for uranium electrosorption at low pH value of 2. Experiments using other carbon-based electrodes were also carried out for comparison. The kinetics, isotherm, selectivity, reusability and power consumption during the uranyl ions (UO22+) electrosorption were studied in-depth. The effects of voltage and frequency on UO22+ selectivity among coexisting ions were investigated. The results showed that UO22+ (20 mg/L), removal by CC-AO was 94.3% at pH = 2 with a high electrosorption capacity of 989.5 mg/g (within 12.5 h). The electric field drove UO22+ to move to the cathode surface and produced UO3·2H2O on CC-AO. Under the optimal electric field (- 2.5 V, 800 Hz), CC-AO achieved the highest UO22+ selectivity in the simulated acidic uranium mine wastewater, and the frequency was the main factor. The CC-AO can be effectively used for seven UO22+ electrosorption-desorption cycles. Moreover, a new index of “unit power consumption for half amount uptake” (PC1/2) was proposed to quantify the power consumption during UO22+ uptake by different electrodes. In electrosorption system, the available area of CC-AO is larger than that of CF-AO, so its electrosorption efficiency for UO22+ is much higher than the latter. The current CC-AO showed clear advantages in terms of electrochemical features, adsorption capacity, selectivity, and power consumption at such low pH condition, indicating an application potential for uranium recovery from acidic uranium mine wastewaters.
科研通智能强力驱动
Strongly Powered by AbleSci AI