温度系数
声表面波
材料科学
无定形固体
图层(电子)
铌酸锂
二极管
光电子学
薄膜
碲
光学
复合材料
化学
冶金
纳米技术
有机化学
物理
作者
Namrata Dewan Soni,Monika Tomar,Vinay Gupta,K. Sreenivas
摘要
Amorphous TeO2 thin film, sputtered in the O2+Ar(25%+75%) gas environment using a metallic tellurium target, has been identified as an attractive negative temperature coefficient of delay (TCD) material that can yield a temperature stable device when combined with a surface acoustic wave (SAW) device based on positive TCD material such as LiNbO3. The influence of amorphous TeO2 over-layer on the SAW propagation characteristics (velocity and temperature coefficient of delay) of the SAW filters (36 and 70 MHz) based on 128° rotated Y-cut X-propagating lithium niobate (128° Y-XLiNbO3) single crystal has been studied. It is found that 0.042λ thick TeO2 over-layer on a prefabricated SAW device operating at 36 MHz centre frequency, reduces the TCD of the device from 76ppm°C−1 to almost zero (∼1.4ppm°C−1) without deteriorating its efficiency and could be considered as a suitable alternative for temperature stable devices in comparison to conventional SiO2 over-layer.
科研通智能强力驱动
Strongly Powered by AbleSci AI