膜
结垢
反渗透
生物污染
聚酰胺
化学工程
接触角
吸附
表面改性
化学
材料科学
高分子化学
色谱法
作者
Jack Gilron,Sophia Belfer,Pasi Väisänen,Marianne Nyström
出处
期刊:Desalination
[Elsevier BV]
日期:2001-11-01
卷期号:140 (2): 167-179
被引量:155
标识
DOI:10.1016/s0011-9164(01)00366-6
摘要
The effects of surface modification of commercial reverse osmosis (RO) polyamide membranes were studied in terms of flux/rejection and surface properties. Selected RO membranes, spanning ultra-low pressure to seawater membranes, were modified by in-situ graft polymerization using redox generation of monomer radicals. Modification of the membrane significantly reduced both receding and advancing contact angles of some of the membranes as measured by a modified Wilhelmy plate method. Lower contact angles indicate more hydrophilic membranes and such membranes will potentially show better resistance to fouling by hydrophobic foulants. This was confirmed by adsorption measurements carried out on modified and unmodified membranes with a highly fouling surface water. Modified membranes adsorbed less organic material and were more easily cleaned than unmodified membranes. Specific fluxes were not changed by more than 0–25% and NaCl rejection was unchanged or increased slightly.
科研通智能强力驱动
Strongly Powered by AbleSci AI