多模光纤
光开关
多路复用
光电子学
插入损耗
绝缘体上的硅
硅光子学
材料科学
光子学
光突发交换
炸薯条
带宽(计算)
光学
计算机科学
物理
硅
光学性能监测
波分复用
光纤
电信
波长
作者
Cao Dung Truong,Duy Nguyen Thi Hang,Hengky Chandrahalim,Minh Tuan Trinh
标识
DOI:10.1038/s41598-020-80174-8
摘要
Abstract Multimode optical switch is a key component of mode division multiplexing in modern high-speed optical signal processing. In this paper, we introduce for the first time a novel 2 × 2 multimode switch design and demonstrate in the proof-of-concept. The device composes of four Y-multijunctions and 2 × 2 multimode interference coupler using silicon-on-insulator material with four controllable phase shifters. The shifters operate using thermo-optic effects utilizing Ti heaters enabling simultaneous switching of the optical signal between the output ports on four quasi-transverse electric modes with the electric power consumption is in order of 22.5 mW and the switching time is 5.4 µs. The multimode switch exhibits a low insertion loss and a low crosstalk below − 3 dB and − 19 dB, respectively, in 50 nm bandwidth in the third telecom window from 1525 to 1575 nm. With a compact footprint of 10 µm × 960 µm, this device exhibits a relatively large width tolerance of ± 20 nm and a height tolerance of ± 10 nm. Furthermore, the conceptual principle of the proposed multimode switch can be reconfigurable and scalable in multifunctional on-chip mode-division multiplexing optical interconnects.
科研通智能强力驱动
Strongly Powered by AbleSci AI