Inverse kinematics of redundant robot based on VC

This paper uses a 7-degree-of-freedom(7-DOF)manipulator end-effector to research inverse kinematics solution,Three methods are used and compared,including fixing an angle method,the iteration method and the neutral network method.By comparison,the iteration method is much better because of its high accuracy,fast speed and stabilization,and it does not require calculation of the pseudoinverse of the Jacobian.Thus,this control scheme is well suited for real-time implementation,which is essential if the end-effector trajectory is continuously modified based on sensor’s feedback.Finally,using VC++and Microsoft foundation classes(MFC)to achieve the main machine interface.Through verification,the precision meets the requirements of general control system in real-time implementation.