期刊:Advanced Materials Research [Trans Tech Publications] 日期:2015-07-29卷期号:1119: 90-95被引量:7
标识
DOI:10.4028/www.scientific.net/amr.1119.90
摘要
Enhanced oil recovery (EOR) can extend the life of an oil field by providing additional drive mechanism to the crude oil. The use of carbon dioxide (CO 2 ) in EOR application has shown a good potential, but it has some weaknesses such as viscous fingering. Viscous fingering problem can be solved by reducing the CO 2 gas mobility, which can be achieved by transforming the CO 2 gas into surfactant-stabilized foam. However, surfactant-stabilized foam is not very stable under harsh reservoir condition, which could be handled by introducing nanoparticle-stabilized CO 2 foam. Thus, this paper aims to investigate the mobility of nanoparticle-stabilized CO 2 foam at varying brine salinity (1 - 4 wt%), concentration of AOS surfactant (0.01 - 1 wt%) and concentration of nanoparticle (0.05 - 1 wt%). The volumetric phase ratio was fixed at 8 CO 2 /aqueous. The sand pack foam flooding test was conducted to measure the effectiveness of the formulated foam to displace the oil inside the porous medium through mobility and oil recovery measurement. It was found that foam mobility is inversely proportional to oil recovery. Mobility decreased when increase of brine salinity, surfactant and nanoparticle concentration, which has increased the oil recovery. Thus, it is important to reduce the foam mobility for efficient displacement process, which could minimize viscous fingering and enhance the oil recovery. This could be achieved by increasing the viscosity of displacing fluid (foam) for more stable displacement in EOR application.