材料科学
析氧
分解水
催化作用
阳极
化学工程
氧化物
电解水
贵金属
制氢
无定形固体
氧化钴
钴
原子层沉积
电解
无机化学
纳米技术
图层(电子)
金属
电极
电化学
冶金
光催化
化学
有机化学
物理化学
工程类
电解质
生物化学
作者
Thành Trần‐Phú,Hongjun Chen,Rahman Daiyan,Manjunath Chatti,Borui Liu,Rose Amal,Yun Liu,Douglas Robert MacFarlane,Alexandr N. Simonov,Antonio Tricoli
标识
DOI:10.1021/acsami.2c05849
摘要
The large-scale deployment of proton-exchange membrane water electrolyzers for high-throughput sustainable hydrogen production requires transition from precious noble metal anode electrocatalysts to low-cost earth-abundant materials. However, such materials are commonly insufficiently stable and/or catalytically inactive at low pH, and positive potentials required to maintain high rates of the anodic oxygen evolution reaction (OER). To address this, we explore the effects of a dielectric nanoscale-thin layer, constituted of amorphous TiO 2, on the stability and electrocatalytic activity of nanostructured OER anodes based on low-cost Co 3 O 4 . We demonstrate a direct correlation between the OER performance and the thickness of the atomic layer deposited TiO 2 layers. An optimal TiO 2 layer thickness of 4.4 nm enhances the anode lifetime by a factor of ca. 3, achieving 80 h of continuous electrolysis at pH near zero, while preserving high OER catalytic activity of the bare Co 3 O 4 surface. Thinner and thicker TiO 2 layers decrease the stability and activity, respectively. This is attributed to the pitting of the TiO 2 layer at the optimal thickness, which allows for access to the catalytically active Co 3 O 4 surface while stabilizing it against corrosion. These insights provide directions for the engineering of active and stable composite earth-abundant materials for acidic water splitting for high-throughput hydrogen production.
科研通智能强力驱动
Strongly Powered by AbleSci AI