多模光纤
模式(计算机接口)
波导管
光学
订单(交换)
材料科学
光电子学
物理
计算机科学
光纤
经济
财务
操作系统
作者
A.G. Bailey,D Harries,R D Stewart
标识
DOI:10.1088/0022-3735/8/2/020
摘要
An overmoded rectangular waveguide system which operates in the vicinity of 30 GHz is used to investigate multimode propagation problems. By careful design of the input waveguide either a relatively pure TE10 or a combination of TE10 and higher modes may be launched into a 3 m long overmoded test section of the system. The overmoded section is terminated in a matched load. The waveguide will support TEn0 modes where n is any odd integer between 1 and 13. Even-order modes are normally suppressed, if they arise at all, by a longitudinal slot along the centre of one of the broad faces of the waveguide. Electric field amplitude and phase profiles within the overmoded waveguide are measured continuously, either transversely or longitudinally. Experimental measurements of the field within the waveguide enable mode content to be determined for comparison with theoretical data. In this way the amplitudes and phases of the higher-order propagating modes are determined.
科研通智能强力驱动
Strongly Powered by AbleSci AI