Screen Printed Silver Contacting Interface in Industrial Crystalline Silicon Solar Cells

硅 晶体硅 接口(物质) 材料科学 纳米技术 工程物理 光电子学 工程类 复合材料 毛细管数 毛细管作用
作者
Enrique Cabrera Campos
出处
期刊:University of Konstanz - KOPS - The Institutional Repository of the University of Konstanz 被引量:7
摘要

This dissertation contributes to more insights to the fundamental understanding of the front screen printed Ag contact formation on Si n+ emitters. Screen printing Ag paste needs to be fired through the SiNX antireflexion layer, firing-compatible with the Al-BSF requirements, achieve good mechanical adhesion between the silver finger and the Si surface and contact n+ emitters with varying properties without damaging the junction. These challenging requirements need to be fulfilled by the result of the simultaneous chemical reactions between Ag, glass frit, SiNX , n+ doped Si emitter and O2 present in the atmosphere during the firing process. The final contact mainly consists of Ag crystallites distributed along the Si surface, a glass layer containing metal precipitates, and a sintered silver finger on top. To identify the key reasons behind a good ohmic contact, we metallized Si solar cell emitters with different silver pastes on textured and flat silicon surfaces and we applied a sequential selective silver-glass etching process to expose and isolate the different contact components. The surface configurations after the etching sequences were analyzed with SEM. We observed glass-free emitter areas at the tops of some Si pyramids that lead to the formation of direct contacts between the Ag crystallites grown into the Si emitter and the bulk of the silver finger. Thereafter, we focused on the understanding of the current transport mechanisms from the silicon emitter into the bulk of the silver finger. For this, liquid conductive silver after different contact etch-backs was applied and the contact resistivity was measured to determine the dominant microscopic conduction path system. We presented experimental evidence that the major current flow into the silver finger is through these Ag crystallites directly contacted to the silver finger. Hence, for screen-printed silver paste metallization, the presence of direct Ag crystallites is essential for the current conduction from the Si emitter to the silver finger and thus for low contact resistivity. For this purpose, we focused on the origin of these direct contacts. On textured surfaces we varied the Si pyramid sizes, rounded the pyramid tips to varying degrees and we also fabricated flat smooth and mc-Si surfaces. We observed that the size of the pyramids does not play an important role in the achievement of low specific contact resistivity unless the pyramid heights become smaller than the thickness of the glass layer. Contrariwise, rounding of the pyramid tips with standard heights increases specific contact resistivity significantly. Additionally, better contact resistivity on isotextured than flat surfaces were observed, even though the latter contain more Ag crystallites underneath the glass. Our observations indicate that a high density of Ag crystallites is not necessarily synonymous for a good contact, but of highest importance is how many of these Ag crystallites provide a direct connection with the silver finger. Also honeycomb textured Si features promote direct contacts at its elevated texture edges. To disregard the influence of the emitter doping concentration on the contact formation that is reportedly higher at the pyramid tips, we included surfaces without phosphorus doping in our study. Glass-free regions were also observed without P doping contained in these direct connections at the Si tips, where it is supposedly easier for Ag crystallite nucleation due to less Si atom back-bonding. Thus, from our microscopic investigations we suggested that the largest influence on the topography dependent contact resistance comes from the surface sharpness dependent glass coverage governing the amount of Ag crystallites directly connected with the silver finger bulk. Finally, we concentrated on the impact of defects originating from electrically inactive phosphorus on contact formation within silver thick film metallized silicon solar cells. For this purpose, emitters with varying sheet resistance, depth and dead layer were metallized with silver pastes from different generations. Macroscopic contact resistivity measurements were compared to the microscopic contact configurations studied by SEM. We found that the density of Si surface embedded Ag crystallites scales proportionally to the electrically inactive P, and is independent of the sheet resistance. Using the newest silver paste, the Ag crystallite density is independent of the emitter doping, but the Ag crystallite size increases as a function of the thickness of the dead layer. The presence of glass-free regions needed for the direct connection between Ag crystallites and the silver finger to achieve good quality contact depends on the paste composition and on the surface texture, and does not vary with the Si emitter properties. TEM characterization of the excess P doped Si crystal lattice shows that significant strain and Si bond weakening may play a major role for both Ag crystallite nucleation and growth. Furthermore, to study the impact of defects in general on Ag crystallite formation, mechanical defects were intentionally produced on wafers without P diffusion, and multicrystalline Si with its dislocations and grain boundaries was metallized. While sub-surface micro-cracks and dislocations promote Ag crystallite nucleation, but not their further growth, there is no Ag crystallite formation at the studied electrically inactive grain boundaries. It is suggested that tensile stress in Si triggers Ag crystallite formation while compressive stress does not. One of the aims of this thesis was to contribute to the fundamental understanding of the screen printed Ag contact formation. Requirements for achieving a good contact, like surface sharpness and glass layer coverage were discussed. For future investigations, it would be interesting to use the results of this thesis and test other contact metals in order to reach the transition towards the reduction or replacement of silver in the front screen printed paste. Finally, whether or not the Ag crystallites are in direct contact with the silver finger or in quasi direct contact (separated from it by a very thin glass layer of less than 1nm) will continue to be discussed. However, the presence of Ag crystallites is required for the current transport. In fact, for all the industrial silver pastes of different generations and manufacturers that were investigated in this thesis, we always observed Ag crystallites underneath the glass layer or directly connected with the silver finger at the Si pyramid tips for optimal firing conditions. If it was possible to avoid the Ag crystallite formation while retaining a low specific contact resistance, an ideal contact could be achieved. Because there would be no metal penetration into the emitter and therefore no contact induced recombination losses, which are currently the main efficiency limiting factor. However, the glass layer is still not sufficiently conductive to allow for current transport without Ag crystallites. Therefore for future experiments, it would be interesting to measure the conductivity of the glass layer.

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
困困困完成签到,获得积分10
1秒前
忧伤的白秋完成签到,获得积分10
1秒前
勤劳的乐蕊完成签到,获得积分10
4秒前
噜噜晓完成签到 ,获得积分10
6秒前
呆橘完成签到 ,获得积分10
7秒前
踏实谷蓝完成签到 ,获得积分10
9秒前
林韵悠扬完成签到 ,获得积分10
10秒前
土豆完成签到 ,获得积分10
11秒前
科研蛀虫完成签到 ,获得积分10
11秒前
黎咩e茹完成签到,获得积分10
11秒前
13秒前
苗条的奇异果完成签到,获得积分10
15秒前
细心又菡发布了新的文献求助10
21秒前
腼腆的眼睛完成签到 ,获得积分10
23秒前
沙莎完成签到 ,获得积分10
24秒前
CodeCraft的应助被细心又菡采纳,获得10
25秒前
meilirenshengzcs完成签到,获得积分10
25秒前
石头完成签到 ,获得积分10
27秒前
张长剑完成签到,获得积分10
28秒前
chaosyw完成签到,获得积分10
30秒前
Lucas的应助被张长剑采纳,获得10
34秒前
黄锐完成签到 ,获得积分10
35秒前
yeeja完成签到 ,获得积分10
35秒前
冷静青枫完成签到,获得积分10
39秒前
小胖wwwww完成签到 ,获得积分10
39秒前
梦安完成签到 ,获得积分10
40秒前
七夜完成签到 ,获得积分10
41秒前
lianxin完成签到 ,获得积分10
41秒前
panpanou完成签到 ,获得积分10
43秒前
YF是杨芳完成签到 ,获得积分10
48秒前
包容的雨泽完成签到 ,获得积分10
50秒前
洗月完成签到 ,获得积分10
50秒前
蒜蒜完成签到 ,获得积分10
52秒前
hanliulaixi完成签到 ,获得积分10
1分钟前
淡然的紫伊完成签到,获得积分10
1分钟前
1分钟前
沙漏的回忆完成签到 ,获得积分10
1分钟前
ahoshuo完成签到,获得积分10
1分钟前
1分钟前
1分钟前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
John McDowells Bildungstheorie 800
Social Psychology in the Real World 600
八旗制度の研究 600
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8180068
求助须知:如何正确求助?哪些是违规求助? 9570224
关于积分的说明 21808724
捐赠科研通 7776054
什么是DOI,文献DOI怎么找? 3433261
关于科研通互助平台的介绍 2557425
邀请新用户注册赠送积分活动 2479012