Hierarchical NiMn Layered Double Hydroxide/Carbon Nanotubes Architecture with Superb Energy Density for Flexible Supercapacitors

A hierarchical nanostructure composed of NiMn‐layered double hydroxide (NiMn‐LDH) microcrystals grafted on carbon nanotube (CNT) backbone is constructed by an in situ growth route, which exhibits superior supercapacitive performance. The resulting composite material (NiMn‐LDH/CNT) displays a three‐dimensional architecture with tunable Ni/Mn ratio, well‐defined core‐shell configuration, and enlarged surface area. An electrochemical investigation shows that the Ni 3 Mn 1 ‐LDH/CNT electrode is rather active, which delivers a maximum specific capacitance of 2960 F g –1 (at 1.5 A g –1 ), excellent rate capability (79.5% retention at 30 A g –1 ), and cyclic stability. Moreover, an all‐solid‐state asymmetric supercapacitor (SC) with good flexibility is fabricated by using the NiMn‐LDH/CNT film and reduced graphene oxide (RGO)/CNT film as the positive and negative electrode, respectively, exhibiting a wide cell voltage of 1.7 V and largely enhanced energy density up to 88.3 Wh kg –1 (based on the total weight of the device). By virtue of the high‐capacity of pseudocapacitive hydroxides and desirable conductivity of carbon‐based materials, the monolithic design demonstrated in this work provides a promising approach for the development of flexible energy storage systems.