钝化
材料科学
钙钛矿(结构)
光伏
晶界
微晶
载流子寿命
光电子学
光伏系统
退火(玻璃)
钙钛矿太阳能电池
纳米技术
粒度
太阳能电池
能量转换效率
化学工程
薄膜
卤化物
硅
冶金
微观结构
图层(电子)
电气工程
工程类
作者
Mahdi Malekshahi Byranvand,Michael Saliba
出处
期刊:Solar RRL
[Wiley]
日期:2021-06-23
卷期号:5 (8)
被引量:117
标识
DOI:10.1002/solr.202100295
摘要
Perovskite solar cells (PSCs) have been introduced as an attractive photovoltaic technology over the past decade due to their low‐cost processing, earth‐abundant raw materials, and high power conversion efficiencies (PCEs) of up to 25.2%. However, the relatively high density of defects within the bulk, grain boundaries, and surface of polycrystalline perovskite films acts as recombination centers and facilitates ion migration, lowering the theoretical PCE ceiling, often leading to inferior device stability. Therefore, understanding the defect sources and developing passivation methods are key factors for reaching higher PCEs and stabilities in perovskite photovoltaics. Herein, various passivation methods, including bulk and surface treatment of perovskite films, are explored. In the bulk treatment, the passivating agents should be directly added to the perovskite precursor. However, in the surface treatment method, the surface of perovskite films can be treated by inducing passivating agents during the intermediate phase or after annealing steps, denoted here as in‐film or surface posttreatment. In addition, different kinds of passivating agents are categorized based on their functional groups. Finally, the outline directions to minimize the defects in perovskite films are highlighted.
科研通智能强力驱动
Strongly Powered by AbleSci AI