催化作用
化学
选择性催化还原
氧化还原
氧气
无机化学
X射线光电子能谱
催化氧化
核化学
化学工程
有机化学
工程类
作者
Yadi Qin,Qiyu Weng,Yuqun Zhuo
出处
期刊:Energy Engineering
[Taylor & Francis]
日期:2021-11-22
卷期号:119 (1): 35-47
被引量:2
标识
DOI:10.32604/ee.2022.015477
摘要
In order to improve the ability of SCR catalyst to catalyze the oxidation of gaseous elemental mercury, a series of novel Ce modified SCR (Selection Catalytic Reduction, V2O5–WO3/TiO2) catalysts were prepared via two-step ultrasonic impregnation method. The performance of Ce/SCR catalysts on Hg0 oxidation and NO reduction as well as the catalytic mechanism on Hg0 oxidation was also studied. The XRD, BET measurements and XPS were used to characterize the catalysts. The results showed that the pore volume and pore size of catalyst was reduced by Ce doping, and the specific surface area decreased with the increase of Ce content in catalyst. The performance on Hg0 oxidation was promoted by the introduction of CeO2.Ce1/SCR (1%Ce, wt.%) catalyst exhibited the best Hg0 oxidation activity of 21.2% higher than that of SCR catalyst at 350°C, of which the NO conversion efficiency was also higher at 200–400°C. Furthermore, Ce1/SCR showed a better H2O resistance but a slightly weaker SO2 resistance than SCR catalyst. The chemisorbed oxygen and weak absorbed oxygen on the surface of catalyst were increased by the addition of CeO2. The chemisorbed oxygen and weak absorbed oxygen on the surface of catalyst were increased by the addition of CeO2. The Ce1/SCR possed better redox ability compared with SCR catalyst. HCl was the most effective gas responsible for the Hg0 oxidation, and the redox cycle (V4+ + Ce4+ ↔ V5+ + Ce3+) played an important role in promoting Hg0 oxidation.
科研通智能强力驱动
Strongly Powered by AbleSci AI