材料科学
涂层
复合材料
微观结构
粘结强度
扫描电子显微镜
碳钢
马氏体
碳化物
变形(气象学)
沉积(地质)
冶金
腐蚀
粒度
图层(电子)
古生物学
生物
胶粘剂
沉积物
作者
George Sahaya Nixon Rethnam,Subramanian Manivel,Vijay Kumar Sharma,Ch. Srinivas,Asif Afzal,Abdul Razak Kaladgi,Sagr Alamri,C. Ahamed Saleel
出处
期刊:Materials
[Multidisciplinary Digital Publishing Institute]
日期:2021-08-31
卷期号:14 (17): 4967-4967
被引量:24
摘要
Friction surfacing is a solid-state coating process that uses plastic deformation to improve the efficiency of the core metallic pattern, resulting in fine-grained coatings with superior wear and corrosion properties. This article focuses on the development of inherently homogeneous, non-diluted coating of AISI316Ti stainless steel above EN8 and also encloses the empirical relationship for the prediction of bond strength (Bs), coating thickness (Ct), and coating width (Cw). The key individualities for bonding geometry were believed to be the process parameters such as rotational speed (rpm), traverse speed (mm/s), and axial load (kN). The effect of input parameters on the bond’s external dimensions and strength was investigated using a multi-objective optimization approach through experimentation. The bond’s strength improved as the coating thickness was reduced and the coating width was increased. The grain-refined coatings superimposing martensitic microstructure with no deposition of carbide particles added value to the metallurgical study using the scanning electron microscope.
科研通智能强力驱动
Strongly Powered by AbleSci AI