期刊:IEEE Transactions on Components, Packaging and Manufacturing Technology [Institute of Electrical and Electronics Engineers] 日期:2026-01-01卷期号:: 1-1被引量:1
标识
DOI:10.1109/tcpmt.2026.3731657
摘要
Compared with conventional integrated interconnection technologies, through glass via (TGV) interconnection structures, benefiting from smaller package dimensions, excellent electrical performance, and favorable thermal stability, are regarded as one of the most promising interconnection solutions for advanced 3D packaging. However, during practical service, the mismatch in coefficients of thermal expansion (CTE) between heterogeneous material interfaces gives give rise to significant thermomechanical incompatibilities in TGV structures when subjected to cyclic thermal loading, which promote the development of high localized thermal stresses. Such thermally induced stresses give rise to pronounced cyclic displacement and volumetric contraction in the copper filled vias, thereby accelerating structural degradation and shortening the service lifetime of electronic devices. To address these issues, this study integrates crystal plasticity theory into finite element simulations to establish a two-dimensional polycrystalline copper TGV numerical model that explicitly accounts for grain size effects. Under thermal cycling conditions, the influences of grain number and sidewall tilted angle on the deformation behavior and damage evolution of TGV-Cu are systematically investigated. The results indicate that an increase in grain number leads to more pronounced stress and deformation localization within the structure, which in turn elevates the creep strain rate and accelerates service degradation. In addition, the sidewall tilted angle is found to have a significant impact on the fatigue lifetime of TGV structures. Larger tilted angles induce more severe pumping and shrinkage deformation, thereby markedly deteriorating the thermal stability and service reliability of TGV interconnects in high-power electronic devices.