材料科学
复合数
涂层
阴极
复合材料
化学工程
化学
工程类
物理化学
作者
Thanh Nhat Phat Nguyen,Chelladurai Karuppiah,Wen‐Chen Chien,She‐Huang Wu,Rajan Jose,Shingjiang Jessie Lue,Chun‐Chen Yang
标识
DOI:10.1016/j.electacta.2020.136980
摘要
Mixed ionic (Li1.4Al0.4Ti1.6(PO4)3; LATP) and electronic (porous carbon; C) conductor based composite coating is demonstrated on LiFe1/3Mn1/3Co1/3PO4/C olivine-type (LFMCP) composite cathode materials, for the first time, by dry particle coating method using novel mechanofusion treatment. The LFMCP cathode material is prepared through one-time (LFMCP#1) and two-time (LFMCP#2) ball-mill plus spray dry method by adding transition metal precursors with citric acid and sucrose as reducing agent and carbon source. Later, the LFMCP#2 sample is dry coated with 2 wt.% [email protected] composite filler to enhance the electrochemical performance. The initial charge-discharge result reveals the discharge capacity of the LFMCP#[email protected] is around 151.87 mAh g−1 at 0.1C rate which is comparatively higher than the LFMCP#1 and LFMCP#2 electrodes. Besides, LFMCP#[email protected]/Li cell achieved superior capacity retention value around 92.20%, after 30 cycles at 0.1C/0.1C and 81.01% for 100 cycles at 1C/1C rate. The excellent cycle stability is archived due to the improved interface properties between the [email protected] coated LFMCP materials and electrolytes. AC impedance analysis confirms the lower charge transfer resistance and higher Li+ ion diffusion properties of LFMCP#[email protected] materials. The results suggested that the dry particle coating of LiFe1/3Mn1/3Co1/3PO4 material with [email protected] coating layer can used as a potential candidate for the high voltage lithium battery.
科研通智能强力驱动
Strongly Powered by AbleSci AI