纤维素
再生纤维素
尿素
溶解
溶解度
结晶度
膜
水溶液
材料科学
核化学
化学工程
化学
高分子化学
有机化学
复合材料
生物化学
工程类
作者
Sinyee Gan,Farah Nadia Mohammad Padzil,Sarani Zakaria,Chin Hua Chia,Sharifah Nabihah Syed Jaafar,Shan Chen
出处
期刊:Bioresources
[North Carolina State University]
日期:2015-02-18
卷期号:10 (2)
被引量:16
标识
DOI:10.15376/biores.10.2.2244-2255
摘要
The liquid hot water (LHW) pretreatment on cotton linter (CL) was carried out using an autoclave heated in a hot oil bath.The LHW pretreated CL (LCL) was dissolved in NaOH/urea and LiOH/urea aqueous solutions and subsequently used to produce cellulose membrane.The effects of LHW pretreatment, amount of cellulose, and type of alkaline solvent on properties of cellulose solution and cellulose membrane were studied.The formation of cellulose II and crystallinity index (CrI) on the cellulose membranes were confirmed by X-ray diffraction (XRD).The morphology of cellulose membranes were observed by field emission scanning electron microscopy (FESEM).The LHW pretreatment resulted in higher cellulose solubility, higher cellulose solution viscosity, and improved properties of regenerated cellulose products compared to non-treated cellulose.Results also revealed that the amount of cellulose used affected the solubility and viscosity of the cellulose solution and the higher dissolving power of the LiOH/urea system as compared to the NaOH/urea system.In fact, higher solubility and viscosity properties are key factors in many cellulose applications such as membranes, fibers, hydrogels, and other regenerated cellulose products.
科研通智能强力驱动
Strongly Powered by AbleSci AI