材料科学
光电子学
异质结
硅
非晶硅
太阳能电池
光伏系统
碲化镉光电
吸收(声学)
光学
能量转换效率
晶体硅
电气工程
复合材料
物理
工程类
作者
Messaoud Boumaour,S. Sali,Salim Kermadi,Lyes Zougar,A. Bahfir,Z. Chaieb
标识
DOI:10.1080/16583655.2019.1623476
摘要
To get enhanced long-wavelength absorption, an impurity photovoltaic (IPV) mechanism was implemented within a transparent conducting oxide (TCO) at the rear of a solar cell. The numerical simulation of the N+/P (silicon)/IPV-TCO device was carried out by using SCAPS-1D program which allows the inclusion of optically active defects. In the proposed heterostructure configuration, ZnTe is a suitable material as back surface reflector. In analyzing the Si/ZnTe interface, lattice mismatch, energy band alignment and defects density were considered with appropriate treatment. In particular, to cure the detrimental 12% lattice mismatch at the interface, a thin silicon amorphous layer was inserted in-between, allowing 22.98% conversion efficiency. With adapted ZnTe Lucovsky's model for the optical capture cross sections and introduction of an oxygen radiative IPV defect (O2 level at 0.4 eV below the conduction band), a conversion efficiency of 27.15% was ultimately achieved. The experimental feasibility of the high-efficiency heterostructure device is evaluated.
科研通智能强力驱动
Strongly Powered by AbleSci AI