Improving capacitive deionization performance by using O2 plasma modified carbon black

Previous research on capacitive deionization (CDI) mainly focuses on electrode active materials, while the research on conductive additive and their modification for improving CDI performance are rarely reported. In this work, we mainly investigate the effect and mechanism of oxygen (O2) plasma-modified carbon black (PCB) to enhance CDI performance. The CB treated with O2 plasma at 100 W for 10 min (CB-100 W-10 min) was assembled with activated carbon (AC) to form a CB-100 W-10 min/AC electrode with excellent desalination performance (32.54 mg g−1), 6.9 times that of the original CB/AC electrode (OCB/AC, 4.91 mg g−1). The roles of the specific surface area, hydrophilicity, electrical conductivity, and specific capacitance of CB in enhancing the performance of CDI were explored, and the interaction mechanism between H2O molecules and CB was investigated using molecular dynamics (MD) simulations. The advantages of PCB are mainly attributed to the synergy of the following aspects: (i) The excellent three-dimensional network structure acts as a “bridge” between activated carbon and increases the contact sites for allowing more PCB and AC to participate in the electrosorption process; (ii) Shorter electron transmission paths and more electron transmission channels between PCB and AC promote the electrosorption rate; (iii) High surface roughness and oxygen-containing functional groups of PCB boost hydrophilicity and dispersibility. Interestingly, we found that PCB possesses universal applicability in the enhancement of deionization performance of various active materials for purification of brine, heavy metals and radionuclides. This work unprecedentedly applies plasma technology to the modification of conductive additive, providing new ideas for material modification and improvement of CDI technology.