材料科学
选择性激光熔化
钻石
激光器
吸收(声学)
复合材料
光电子学
冶金
光学
微观结构
物理
作者
Dorota Laskowska,Tomasz Szatkiewicz,Błażej Bałasz,K. Mitura
出处
期刊:Materials
[Multidisciplinary Digital Publishing Institute]
日期:2023-04-18
卷期号:16 (8): 3196-3196
被引量:35
摘要
Triply periodic minimal surfaces (TPMS) are structures inspired by nature with unique properties. Numerous studies confirm the possibility of using TPMS structures for heat dissipation, mass transport, and biomedical and energy absorption applications. In this study, the compressive behavior, overall deformation mode, mechanical properties, and energy absorption ability of Diamond TPMS cylindrical structures produced by selective laser melting of 316L stainless steel powder were investigated. Based on the experimental studies, it was found that tested structures exhibited different cell strut deformation mechanisms (bending-dominated and stretch-dominated) and overall deformation modes (uniform and “layer-by-layer”) depending on structural parameters. Consequently, the structural parameters had an impact on the mechanical properties and the energy absorption ability. The evaluation of basic absorption parameters shows the advantage of bending-dominated Diamond TPMS cylindrical structures in comparison with stretch-dominated Diamond TPMS cylindrical structures. However, their elastic modulus and yield strength were lower. Comparative analysis with the author’s previous work showed a slight advantage for bending-dominated Diamond TPMS cylindrical structures in comparison with Gyroid TPMS cylindrical structures. The results of this research can be used to design and manufacture more efficient, lightweight components for energy absorption applications in the fields of healthcare, transportation, and aerospace.
科研通智能强力驱动
Strongly Powered by AbleSci AI