波导管
多模光纤
谐振器
材料科学
氮化硅
插入损耗
光电子学
光学
光子学
薄脆饼
硅光子学
硅
物理
光纤
作者
Shuai Cui,Kaixiang Cao,Zhao Pan,Xiaoyan Gao,Yuan Yu,Xinliang Zhang
出处
期刊:
[SPIE]
日期:2023-07-04
卷期号:2 (04): 1-8
被引量:25
标识
DOI:10.1117/1.apn.2.4.046007
摘要
Silicon nitride (Si3N4) waveguides with high confinement and low loss have been widely used in integrated nonlinear photonics. Indeed, state-of-the-art ultralow-loss Si3N4 waveguides are all fabricated using complex fabrication processes, and all of those reported that high Q microring resonators (MRRs) are fabricated in laboratories. We propose and demonstrate an ultralow-loss Si3N4 racetrack MRR by shaping the mode using a uniform multimode structure to reduce its overlap with the waveguide. The MRR is fabricated by the standard multi project wafer (MPW) foundry process. It consists of two multimode straight waveguides (MSWs) connected by two multimode waveguide bends (MWBs). In particular, the MWBs are based on modified Euler bends, and an MSW directional coupler is used to avoid higher-order mode excitation. In this way, although a multimode waveguide is used in the MRR, only the fundamental mode is excited and transmitted with ultralow loss. Meanwhile, thanks to the 180 deg Euler bend, a compact chip footprint of 2.226 mm perimeter with an effective radius as small as 195 μm and a waveguide width of 3 μm is achieved. Results show that based on the widely used MPW process, a propagation loss of only 3.3 dB / m and a mean intrinsic Q of around 10.8 million are achieved for the first time.
科研通智能强力驱动
Strongly Powered by AbleSci AI