Ultra-broadband metamaterial absorber for collecting electromagnetic waves from the ultraviolet to the mid-infrared

Due to the inherent local limitations of surface plasmon resonance, it is challenging to design an ultra-broadband electromagnetic wave absorber covering multiple bands. In this paper, a novel Ultra-broadband perfect absorber is designed, which is a simple-type structure composed of metal-dielectric-metal (MDM), and the resonant cavity formed by metal and dielectric realizes high absorption. The calculated results of the absorber show that the average absorption rate in the range of 200–8000 nm is 95.70%, and the absorption bandwidth over 90% is 7800 nm. The ultra-broadband absorption can be attributed to the coupling effect of multiple resonances inside and outside the resonant cavity, which gives our proposed structure a wider bandwidth and higher light absorption capacity than the previously reported work and further reduces the complexity of the structure. When it is replaced by other materials, the structure also maintains high absorbency. In addition, the structure is not only polarization insensitive but also has wide-angle absorption, and it maintains high absorption in transverse magnetic (TM) mode and transverse electric (TE) mode. Even when the incident angle increases to 58°, the average absorption rate is still above 80%. It also has the characteristics of large process tolerance and strong adaptability to changing environments. These results allow the absorber to be applied in solar energy collection, infrared imaging and thermal detection, and optoelectronic devices.