Effect of C-Mn-Cu on microstructure and properties of wire arc additive manufacturing of high-manganese steels

材料科学 微观结构 锰 冶金 奥氏体 层错能 韧性 极限抗拉强度 焊接 复合材料
作者
Jingjing Peng,Tianli Zhang,Lianyong Xu,Geng Chen,Donghai Hu,Zhiming Zhu,Jianguo Ma,Sindo Kou
出处
期刊:Materials Science and Technology [Maney Publishing]
卷期号:40 (16): 1202-1218 被引量:4
标识
DOI:10.1177/02670836241242566
摘要

High-manganese steels, due to their unique combination of strength and elongation, have been widely used in aerospace, petrochemical and rail transportation. However, a prevalent challenge in advancing the utilization of high-manganese steel is the need for corresponding welding consumables. The deformation mechanism of high-manganese steel encompasses three primary mechanisms: martensitic phase transformation, twinning and dislocation movement. The stacking fault energy (SFE) is a critical factor in determining the dominant deformation mechanism in high-manganese austenitic steels. Furthermore, the magnitude of the SFE is principally influenced by the alloying elements present and the temperature at which deformation occurs. Alloying elements can significantly influence the microstructure and mechanical properties of wire arc additive manufacturing (WAAM) of high-manganese steels. The metal powder-cored wire of high-manganese steel with full austenitic microstructure was designed in this paper. The effects of C, Mn and Cu on the microstructure, solute segregation and properties of WAAM of high-manganese steels were systematically investigated by optical microscopy, electron microscopy and mechanical testing. The influence of SFE on the microstructure characteristics and work hardening behaviour were also studied. The results showed that as an increase of the C content, the tensile strength and elongation of deposited metals were improved. The corresponding low-temperature impact toughness increased at first and then decreased. The highest value of impact toughness was 68.5 J with 0.79%C. As the Mn increased, the strength decreased, the elongation increased and the low-temperature impact toughness value displayed an initial increase followed by a subsequent decrease. With the increase of Cu, the yield strength and elongation improved significantly. The tensile strength exhibited a marginal initial increase followed by a decrease, whereas the change was not substantial. In contrast, the low-temperature impact toughness value showed a substantial increase followed by a decrease. The developed M3 wire containing 1.10%C-21%Mn-0.3%Cu possessed the optimum performance (yield strength of 551 MPa, tensile strength of 909 MPa, elongation at break of 30.2%, impact toughness value of 57.5J), with the good mechanical stability and low solidification cracking sensitivity.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
cczzhh完成签到,获得积分10
刚刚
科目三的应助被sink采纳,获得10
刚刚
yf发布了新的文献求助10
刚刚
刚刚
666完成签到,获得积分10
刚刚
局外人发布了新的文献求助10
1秒前
YuJue发布了新的文献求助10
1秒前
1秒前
飘逸秋荷完成签到,获得积分10
1秒前
zz关注了科研通微信公众号
1秒前
1秒前
Ava的应助被Rocky_Qi采纳,获得10
1秒前
YAOYAO完成签到,获得积分0
1秒前
1秒前
猪猪猪完成签到,获得积分20
2秒前
好运小子zzzy完成签到,获得积分10
2秒前
丘山发布了新的文献求助10
2秒前
2秒前
小徐完成签到,获得积分10
2秒前
2秒前
Gxt完成签到,获得积分10
2秒前
墨白cai发布了新的文献求助10
3秒前
今后的应助被churuoxi采纳,获得10
3秒前
FashionBoy的应助被e00ec采纳,获得10
3秒前
狗狗明明发布了新的文献求助10
3秒前
lmg发布了新的文献求助10
4秒前
Evan发布了新的文献求助10
4秒前
luyunxing发布了新的文献求助10
4秒前
活A完成签到,获得积分10
4秒前
ACMI发布了新的文献求助10
4秒前
无极微光的应助被许愿采纳,获得20
4秒前
小二郎的应助被王不倒采纳,获得10
5秒前
Ava的应助被Yang采纳,获得10
5秒前
汉堡包的应助被嗨~小金毛采纳,获得10
5秒前
5秒前
sunying完成签到,获得积分10
5秒前
5秒前
zxf完成签到,获得积分10
6秒前
星星完成签到,获得积分10
6秒前
柯柯发布了新的文献求助10
6秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1500
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
John McDowells Bildungstheorie 800
八旗制度の研究 600
Analyses de reconnaissances de dettes passées devant les échevins d'Ypres (1249-1291) 600
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8159633
求助须知:如何正确求助?哪些是违规求助? 9555145
关于积分的说明 21725138
捐赠科研通 7749593
什么是DOI,文献DOI怎么找? 3427281
关于科研通互助平台的介绍 2552345
邀请新用户注册赠送积分活动 2471619