化学
水解
吸附
淀粉
酶水解
吸收(声学)
焓
吸水率
淀粉酶
核化学
多孔性
有机化学
酶
材料科学
复合材料
物理
量子力学
作者
Román Leyva‐López,Apolonio Vargas‐Torres,Eliazar Aquino‐Torres,Jorge Gutiérrez‐Tlahque,Óscar Javier Hernández-Ortíz,Heidi Maria Palma‐Rodríguez
摘要
ABSTRACT The objective of this study was to evaluate the physicochemical, morphological, and thermal properties of porous corn starch obtained by dual enzymatic modification using α‐amylase (AM) and amyloglucosidase (AMG). Enzymatically modified porous starches were obtained after two distinct hydrolysis times: 16 h (EMS‐16h) and 20 h (EMS‐20h). The adsorption properties of these porous starches enhanced relative to those of the native starch (NS), with water absorption increasing from 138% to 194% and oil absorption from 166% to 267% as the hydrolysis time increased. Furthermore, the adsorption of methylene blue ranged from 10.69 to 53.89 mg/g for NS versus EMS‐20h, and for neutral red, from 9.18 to 49.39 mg/g. Thermal analysis showed that hydrolysis of the granules resulted in an increase in both the peak temperature ( T p ) and enthalpy (Δ H ). Specifically, NS exhibited a T p of 72.43°C and a Δ H of 10.30 J/g, while EMS‐20h showed a T p of 74.15°C and a Δ H of 14.63 J/g. Both peak and final viscosities decreased with increasing hydrolysis time; NS showed values of 4169 and 4659 cP, respectively, compared with 3563 and 3907 cP for EMS‐20h. Microscopic analysis showed an increase in both the number and intensity of the surface holes on the starch granules as the hydrolysis time increased. These findings contribute to the expanded utilization of enzymatically modified starches for adsorption processes in the food industry.
科研通智能强力驱动
Strongly Powered by AbleSci AI