极紫外光刻
计量学
进程窗口
薄脆饼
光学
十字线
平版印刷术
临界尺寸
偏移量(计算机科学)
光掩模
光刻
光学接近校正
计算机科学
过程(计算)
放大倍数
电子工程
物理
极端紫外线
匹配(统计)
干涉测量
材料科学
工程类
尺寸计量学
计算光刻
作者
Joost P. Bekaert,Jirka Schatz,Sotaro Hosoya,Hideaki Komami,Syamashree Roy,Guillaume Libeert,Balakumar Baskaran,Vicky Philipsen,Eric Hendrickx,Darko Trivković,Ulrich Welling,Shosuke Tomizuka,Masataka Yamaji,Tatsuya Tomita,Nobuaki Fujii,Shingo Yoshikawa,Hideki Nakaya,Toshimichi Iwai,Tatsuro Okawa,Wataru Ito
出处
期刊:
日期:2025-11-06
卷期号:: 106-106
被引量:1
摘要
ASML’s first High-NA EUV scanners with 0.55 NA optics are operational. The wafer printing performance is being evaluated and enhanced within the ecosystem of the imec-ASML High-NA lab. Due to the anamorphic optics, High-NA EUV masks are designed at (4x,-8x) magnification compared to wafer scale. Consequently, while mask dimensions further shrink to unprecedented resolution in X-direction, they relax in Y-direction, resulting in asymmetric mask patterns, with new mask perceptions and mask challenges which become dependent on pattern orientation. Meanwhile, at stringent dimensions, CD errors at mask must be further reduced. Moreover, due to the anamorphic optics, even a symmetric CD offset at mask leads to an asymmetric CD error on the wafer. In this context, updating mask metrology alignment between different parties in the litho process is critical in order to minimize mask CD errors originating from differences in metrology conditions. In this paper, we present the outcome after matching the mask CD-SEM conditions between imec’s and a mask maker’s CD-SEM tool, as well as mask metrology alignment with EDA software, since agreement between these parties is essential for achieving a consistent litho process flow from design and OPC, over mask making and metrology, to wafer print. With alignment on optimized settings for metrology on (High-NA) EUV masks, we demonstrate that an excellent match in mask metrology can be achieved. Subsequently, we demonstrate rigorous simulation for a High-NA EUV use-case, based on measured mask contours. Finally, the simulation outcome is compared to High-NA wafer data by means of edge placement evaluation, showing very good correspondence between simulated and measured in-resist contours. This demonstrates how contour-based rigorous simulation and edge placement evaluation are valuable tools for investigating the contribution of the mask to the wafer printing, and assessing the lithographic performance under different exposure conditions, thereby helping to optimize the High-NA EUV lithography process.