Closed-loop recovery of molybdenum and value-added reuse of tungsten from alloy waste in additive manufacturing

As metal additive manufacturing (MAM) technology is booming in the aerospace sector, alternatives to the traditional production methods of metals such as mining, processing, and refining with severe emissions are urgently needed. This study proposed a closed-loop route for efficient recovery of molybdenum (Mo) and value-added reuse of tungsten (W) from Cr-Co-Ni-Mo-W alloy waste in MAM. The results showed that the leaching efficiency of Mo and W reached 99.3% and 99.9%, respectively, using the dual chemical-physical means of mixed-alkali roasting and leaching by microwave heating, while the discharge of waste liquor containing Cr6+ was reduced. Leaching kinetic studies revealed that the metal leaching process was controlled by chemical reaction mechanism. Moreover, the 10%N1923 (primary amine)-5%TRPO (tri-alkyl phosphine oxide)-kerosene extraction system exhibited a synergistic extraction effect on Mo and W. After purification, Mo was recovered as Mo powder for MAM. Simultaneously, the recovered product of W, MnWO4, was applied as a photocatalytic material with excellent degradation of methylene blue dye. Ultimately, the proposed method obtained recovery efficiencies of 98.4% and 99.3% for Mo and W, respectively, achieving efficient and environmentally-friendly reuse of these key metals.