液压泵
齿轮泵
轴向柱塞泵
活塞泵
柱塞泵
变量泵
往复泵
空化
断层(地质)
涟漪
活塞(光学)
水力机械
螺杆泵
工程类
机械工程
流量(数学)
汽车工程
机械
电气工程
地质学
地震学
波前
电压
物理
光学
柱塞
作者
Ming Yang,K A Edge,D N Johnston
出处
期刊:The University of Bath - The University of Bath Online Publications Store
日期:2008-09-01
被引量:4
摘要
Vane pumps are simple in principle and can be mass produced inexpensively, making them well suited to the automotive industry. They also have many other applications, such as in the chemical industry and food industry. A common type of damage to a vane pump is cavitation erosion on the side plates. If this damage is not detected in time, it could cause failure of the pump, which depending on the type of system may have safety implications, and in some cases a high cost from lost production whilst the system is shut down. This kind of damage is common on other types of pumps such as gear pumps and piston pumps. So a practical method for fault diagnosis of hydraulic pumps is required which does not necessitate removal of a pump from the working system. This paper presents a method of detecting and identifying cavitation damage on pump side plates via pump flow ripple. Power steering vane pumps are used for this study, although the principles may also be applicable to other types of vane pump, and indeed to piston and gear pumps. The investigation has been done through measurement and simulation. A numerical model of a vane pump is described, and simulated cavitation damage is introduced into the model. This damage is shown to have a clear effect on the simulated flow ripple. The pump flow ripple has also been measured experimentally using the Secondary Source Method, and artificial damage has been introduced into the pump. The damage is shown to have a clear effect on the measured flow ripple, consistent with the simulation results. Whilst the secondary source enables the measurement of flow ripple in laboratory conditions, it is generally impracticable for in-situ measurement for condition monitoring. A simplified method for calculation of pump flow ripple from in-situ pump pressure ripple measurements and system impedance is discussed.
科研通智能强力驱动
Strongly Powered by AbleSci AI