吸附
化学
高岭石
蒙脱石
伊利石
烷基
分配系数
粘土矿物
离子交换
乙醚
无机化学
有机化学
吸附
矿物学
离子
作者
Aamir Ahmad,Kuo Tian,Burak F. Tanyu,Gregory D. Foster
出处
期刊:ACS ES&T water
[American Chemical Society]
日期:2023-08-29
卷期号:3 (9): 2899-2909
被引量:25
标识
DOI:10.1021/acsestwater.3c00105
摘要
The sorption behavior of 20 per-polyfluoroalkyl substances (PFASs) of varying chain lengths and functional groups was studied with kaolinite, illite, and montmorillonite (as pure clay minerals) at pH 7. The six classes of compounds studied were perfluoroalkyl carboxyl acids, perfluoroalkyl sulfonic acids, alkyl-sulfonamidoacetic acids, fluorotelomer sulfonic acids, alkane sulfonamides, and ether carboxylic acids. The sorption isotherms were obtained using a 0.01 M calcium chloride solution spiked with a multi-solute target PFAS solution, yielding a solute concentration varying from 100 to 400 μg/L. The partition coefficients ( K d ) of all PFASs varied by molecular weight, degree of fluorine substitution, functional group, and cation-exchange capacity. The measured K d value was larger for longer chain lengths and perfluoroalkyl compounds compared with shorter chain lengths and polyfluoroalkyl compounds. PFASs with sulfonamide functional groups showed the strongest sorption, followed by sulfonic and carboxylic acid functional groups. The K d values for all PFASs were found to correlate with increasing cation-exchange capacity of the clay minerals, with the strongest sorption observed by montmorillonite, followed by illite and kaolinite. A parametric model has been established allowing the prediction of PFAS sorption K d in three different common clay minerals.
科研通智能强力驱动
Strongly Powered by AbleSci AI