A flexural-beam-type wide-frequency piezoelectric energy harvester for vertical shaft lifting system vibration monitoring

Abstract The coal mine lifting system may experience serious safety accidents due to severe problems with the bucket guides and rolling guide shoes. A piezoelectric energy harvesting (PEH) device for vibration sensor monitoring of shaft lifting system is proposed for the first time to monitor health of shaft lifting system. However, there are differences in the vibration frequencies, the working conditions are complex, leading to issues such as low energy recovery efficiency of the PEH and difficulty in achieving self-powered. To enhance PEH adaptability and reliability, a specifically designed flexural-beam-type wide-frequency piezoelectric energy harvester(FBT-WF-PEH) and a method of achieving real-time vibration monitoring through auxiliary power supply have been proposed. The results indicate when the excited frequency is 17Hz, the highest external output voltage is 11.2V, and under an external load of 17.5kΩ, the maximum output power is 7.168mW, demonstrating a good performance in terms of output power, and energy harvest bandwidth. The captive power supply test verified the PEH can utilize the vibration environment to achieve auxiliary power supply for monitoring systems under working conditions, which is of great significance for conducting research on health monitoring systems for lifting equipment. On the other hand, the new structure proposed in this study matches the operating frequency in the shaft lifting system, and the energy harvest efficiency is higher.