变量(数学)
计算机科学
刚度
操纵器(设备)
运动(物理)
控制理论(社会学)
机器人
人工智能
工程类
结构工程
数学
控制(管理)
数学分析
作者
Xin Hua Fu,Daohui Zhang,Liyan Mo,Kai Li,Xingang Zhao
出处
期刊:Proceedings
[Institute of Electrical and Electronics Engineers]
日期:2024-05-13
卷期号:: 2979-2985
被引量:1
标识
DOI:10.1109/icra57147.2024.10610612
摘要
Soft manipulators offer the advantages of safety and adaptability. However, due to insufficient stiffness and single motion mode limitations, existing soft manipulators usually exhibit low load capacity and small working space. To address this problem, we propose a novel soft hybrid-driven manipulator with continuous stiffness control capability and multiple motion patterns (omnidirectional bending and extension). Furthermore, we develop kinematic and stiffness models based on the constant curvature assumption. The soft robot consists of a soft bellows actuator and inextensible rigid skeletons, which exhibit a high extension ratio and low drive pressure. With the antagonistic actuation of tendon-pulling and air-pushing, the robot can achieve independent control over stiffness and position in three-dimensional space. The performance associated with the designed soft hybrid-driven manipulator is experimentally verified. The robot can achieve an elongation of 198% and a maximum bending angle of up to 240°. The robot can also increase stiffness by increasing internal air pressure to resist deformation caused by external loads. Additionally, tracking experiments with various trajectories in space verify the accuracy of the kinematic model, which indicates that the soft manipulator can stabilize motion within a broad workspace.
科研通智能强力驱动
Strongly Powered by AbleSci AI