通用串口总线
功率(物理)
电气工程
电压
计算机科学
工程类
物理
操作系统
软件
量子力学
作者
Zhiguo Tong,Junwei Huang,Xiangyu Mao,Rui Paulo Martins,Yan Lü
出处
期刊:IEEE Journal of Solid-state Circuits
[Institute of Electrical and Electronics Engineers]
日期:2025-01-16
卷期号:60 (8): 2866-2878
被引量:5
标识
DOI:10.1109/jssc.2025.3527038
摘要
The development of fast charging technology has significantly reduced the charging time for devices. However, with the increase of power level, the thermal and size issues become the limiting factors for fast charging, especially for compact devices. This article presents the concept of the voltage-regulating cable (VRC) which integrates the charging IC and all the associated passive components into the universal serial bus (USB) cable connector. By relocating the power converter and its associated heat from the devices to the cable, this design significantly reduces the device size and provides an alternative solution for the overheating issues. The VRC can regulate a bidirectional step-down voltage for two kinds of typical application scenarios: adapter-to-device (A2D) and device-to-device (D2D) scenarios. In addition, a symmetrical VRC structure is also proposed to facilitate a reversible and user-friendly connection. The designed VRC prototype, fabricated in 180-nm high-voltage BCD process, occupies an area of$4.7\times 2.9$mm2, including all passive components. It achieves a peak power density of 3.17 W/mm2 when transferring the maximum power of 42 W in the A2D scenario and a peak power density of 1.36 W/mm2 with a maximum power of 18 W in the D2D scenario.
科研通智能强力驱动
Strongly Powered by AbleSci AI