材料科学
焦绿石
热导率
陶瓷
热膨胀
热障涂层
锆酸盐
复合材料
维氏硬度试验
相(物质)
萤石
微观结构
热的
工作(物理)
电导率
矿物学
人口
作者
Qingyun Yang,Jie Xu,Jingzhi Wu,Ziyao Wei,Xiaoying Feng,Feng Gao
摘要
Thermal barrier coatings (TBCs) are widely employed as high‐temperature protective materials for the hot‐section components of aero‐engines. Their performance directly dictates the reliability and operational efficiency of the engine. However, achieving low thermal conductivity while simultaneously retaining a high coefficient of thermal expansion (CTE) and excellent mechanical properties remains a critical challenge in TBC material design. In this study, a non‐stoichiometric high‐entropy strategy was leveraged to synthesize a series of (La 0.2 Nd 0.2 Sm 0.2 Gd 0.2 Yb 0.2 ) 2‐x Zr 2+x O 7 ceramics via a solid‐state reaction method. The effects of excess B‐site Zr 4+ on the microstructure, thermophysical properties, and mechanical performance were systematically investigated. The results indicate that all ceramics exhibit a dual‐phase structure, consisting of pyrochlore and defective fluorite phases. With increasing Zr 4+ content, the pyrochlore phase gradually transforms into the defective fluorite phase. At 1000°C, the thermal conductivity of the materials first decreases and then increases as the fraction of the defective fluorite phase rises, reaching a minimum value of 1.20 W/(m·K). This variation is primarily attributed to the competing mechanisms between changes in the area of the two‐phase interface and the defect concentration. The Vickers hardness ranges from 12.53 to 13.66 GPa, aligning with the trend of relative density. Compared with traditional high‐entropy rare‐earth zirconates, this study integrates non‐stoichiometric regulation with high‐entropy design, allowing the phase fraction and defect population to be adjusted while maintaining favorable CTE and hardness. This work provides a viable strategy for developing next‐generation high‐temperature TBC materials.
科研通智能强力驱动
Strongly Powered by AbleSci AI