碎屑形成
研磨
炸薯条
前角
有限元法
耙
机械工程
过程(计算)
材料科学
钻石
压力(语言学)
工程类
结构工程
计算机科学
机械加工
冶金
刀具磨损
电气工程
操作系统
语言学
哲学
作者
Hans Werner Hoffmeister,Arne Gerdes
出处
期刊:Advanced Materials Research
[Trans Tech Publications]
日期:2011-04-19
卷期号:223: 764-773
被引量:2
标识
DOI:10.4028/www.scientific.net/amr.223.764
摘要
Several authors have previously simulated chip formation and their behaviour at the orthogonal cutting process. In contrast the chip formation for grinding was less investigated. This paper introduces a quick-stop device which allows easy investigation of the chip formation for the grinding process. For this process a workpiece forced by compressed air is shot against a single grain diamond with a large negative rake angle. Cutting forces were measured with a piezo electric sensor and discussed for a cutting speed range from 10m/s up to 30m/s. In Abaqus/Explicit a lagrangian formulation based finite element model was built to describe the chip formation for the grinding process. Chip formation, stress and heat distribution in the workpiece material can be calculated by this simulation model. The material behaviour was described with the Johnson Cook law. The simulation results show a good correlation compared to the quick stop experiments. All in all this simulation leads to a better understanding of the chip formation during grinding.
科研通智能强力驱动
Strongly Powered by AbleSci AI